Why are led fluorescent tubes so popular?
The development of led fluorescent tube to today, the new constant temperature light tube is suitable for any place where the T-type tube is currently used, without the need to modify the existing lamp holder and the traditional ballast and starter, completely replacing the traditional led fluorescent tube .
The existing LED tube has many advantages such as small size, low power consumption, long life, non-toxic and environmental protection, and has gradually developed from outdoor decoration and engineering lighting to household lighting.
The design is novel and the power saving is remarkable. Convenient and useful, safe and reliable, and long life.
1.This product is the most environmentally friendly and energy-saving lighting source in modern times.
2. The LED fluorescent tube has the appearance of a traditional fluorescent tube. scale. The caliber is the same, the length is 60cm, 90cm, 120cm, 150cm, etc., and the power is 8W, 12W, 15W, 18W respectively; while the actual power consumption of 20W traditional fluorescent tube (inductive ballast) is about 53W, 40W traditional daylight The actual power consumption of the tube (inductive ballast) is about 68W; the brightness of the 8Wled fluorescent tube is the same as that of the traditional 20W fluorescent tube, and the brightness of the 15W led fluorescent tube is the same as that of the traditional 40W fluorescent tube.
3. The brightness of the led tube is especially softer and allows people to simply accept it. The service life is 50,000-80,000 hours. The power supply voltage is AC85V-260V, no starter and ballast are needed, fast start-up, low power, no flicker, and no eye fatigue. It is not only super energy-saving but also environmentally friendly. It is one of the key products developed by the national green energy-saving lighting project, and is now the main product that replaces the traditional daylight tube.
4. The installation of led fluorescent tubes is very simple. When installing, remove the original fluorescent tubes and replace them with led fluorescent tubes, and remove the ballast and starter, so that the 220V communication mains can be directly added to the two ends of the led fluorescent tubes. can.
LED fluorescent tubes can save more than 90% of electricity, and their life span is more than 10 times that of ordinary tubes. It is almost free of protection. There is no problem of frequent replacement of tubes, ballasts, and starters. The cost saved in about half a year is only Can be exchanged for cost. The green and environmentally friendly semiconductor electric light source, with soft light and pure spectrum, is conducive to the protection of eyesight and health of workers. The 6000K cold light source gives people a visually refreshing touch, which helps to concentrate and improve efficiency. It is not only super energy-saving but also environmentally friendly, it is one of the products developed by the country's green energy-saving lighting, and it is a high-quality product for the transformation of traditional fluorescent tubes.
