5 Reasons Why Your LED Light Bulbs Are Burning Out
The enormous lifespans of LED bulbs are one of their main selling advantages, but what should you do if you find that yours are burning out too soon?
In ideal conditions, LED bulbs should last somewhere between 15,000 and 50,000 hours, which is an incredible bargain. We're here to explain some of the circumstances that may prohibit your LED bulbs from lasting as long as they can.
1) Utilising the incorrect dimmerswitches
Using LED bulbs in dimmer circuits that aren't compatible with them is one of the most frequent causes of LED bulbs burning out quickly.
First off, keep in mind that LED bulbs are not by default dimmable. Check before installing a replacement bulb since while dimmable LED lights can be used in non-dimmable circuits, the reverse is not true.
Second, the low power demands of LEDs weren't taken into consideration while designing more traditional leading-edge dimmer switches. Instead, switch to a trailing edge dimmer switch.
Thirdly, burnout may result from dimming circuits that are picky about their minimum and maximum load. Your bulbs will last a lot longer if you make sure your switch isn't being overloaded or underloaded.
Simply divide the maximum wattage of the switch by the wattage of the bulbs you intend to use to determine the maximum number of bulbs you are permitted to use.
Examine our selection of dimmer switches that are compatible with LEDs and speak with an electrician to get your dimming circuits LED ready!
2) Excessive heat
Since LED bulbs don't produce as much heat as traditional types of bulbs, they can be more susceptible to overheating. They might burn out too soon as a result of this. Your bulbs will last longer if you keep them cold.
First, make sure the bulbs you're using don't fit the fitting too tightly. You shouldn't use that bulb just because the base fits, though! Verify the lights you use are compatible if your fixtures are enclosed.
Additionally, make sure you don't use more power than the light's maximum wattage. Given the low power requirements of LEDs, this is a less likely cause. It's still a good idea to check because more fixtures are lowering their maximum load to match as low-energy lighting gain popularity.
Make sure there is no insulation covering any recessed LED downlights you use, as this will prevent airflow. An excellent choice is the Integral Evofire IP65 White 70-100mm Cutout Fire Rated Downlight With GU10 Holder And Insulation Guard.
3. Poor Connections
Make sure the E14 or E27 bulbs are not screwed in too firmly or loosely when using them. To make sure the contact points are secure if it is too loose, simply give it one more twist.
You could have unintentionally compressed the socket tab if you screwed the bulb in too firmly. Verify the socket's metal tab. Replace the fitting if it is not seated at a 20–30° angle, or use a pair of pliers to bend the tab into position. Before doing this, make sure the electricity is turned off at the breaker.
It may be time to replace the fitting if it is older because the connection points may have deteriorated over time.
4) The voltage at home is too high
There may be an issue with your mains power source if all of your bulbs are going out too soon or are overly bright. Any more than this, not only for LEDs, but for any bulb, will cause it to burn out quickly. In the UK, this should be roughly 230v at 50Hz.
Contact your energy supplier and a licenced electrician to check the voltage if you think that's the problem.
5) A Poor Batch
A defective light bulb could occasionally elude quality assurance or sustain damage while shipping.
We have a 14-day return policy to protect you if you've tried all the solutions above but your bulb is still burned out. Our bulbs are guaranteed by comprehensive warranty guarantees for long-term peace of mind, so you can be sure they're made to endure.
To view more industry knowledge, please pay attention to Benwei's official website！
