Analysis of the precautions in the installation process of human body induction LED tubes
Human body induction light is an automatic switch control process, there are "voice control", "trigger", "induction", "light control" and other methods. Most people emit infrared rays with a specific wavelength of about 10 microns. The human body induction tube uses a special sensor to detect the existence of this infrared ray. When the infrared rays of the human body are irradiated on the sensor, the electric charge will be released due to the pyroelectric effect, and the subsequent circuit can generate a control signal after detection and processing, so that the light will be turned on, and the light will automatically turn off when the person leaves.
Precautions for installation of human body sensor light switch
1. During the wiring installation process of the human body induction tube, the installation and wiring should be carried out in strict accordance with the instructions of the purchased product to avoid short circuit or overload, which may cause product damage;
2. The power supply must be cut off before installing the switch of the human body induction light. It is best to find a professional electrician to install it to prevent electric shock;
3. The installation height of the switch of the human body induction tube is generally 1.4m~1.6m. It should be noted that it should not be installed in the controlled tube, heat source, the inlet and outlet of hot and cold air, near the vent and in the place where the strong light is directly exposed.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Strip light, If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
www.benweilight.com
