Briefly describe the main structure and scope of application of led light strips
As the main lights and lanterns of indoor lighting in the future, light strips must have the following characteristics: there is no doubt that one must be safe, the second must be energy-saving, and the third must be pleasant. Why do you say that? We install light strips to play a role in lighting, and a very important point is to play a role in decoration and beautification, which must make people look and feel very comfortable.
1. Main structure and scope of application
The LED light shade is made of 6063 aluminum profile with high thermal conductivity, and the appearance is high-end and exquisite. It is suitable for jewelry, display counters, home and villa lighting, shopping malls, hotels, office leisure clubs and other lighting places. It is an ideal light to replace traditional fluorescent lights.
1. Anti-static: Since the LED is a statically insensitive part, if the anti-static measures are not taken when the LED light strip is being repaired, the LED will be burned out, resulting in waste. Therefore, it should be noted that the electric soldering iron must use an anti-static soldering iron, and the maintenance personnel must also take anti-static measures (such as wearing an electrostatic ring and anti-static gloves, etc.).
2. Continuous low temperature: The two main components of led engineering light strips are LED and FPC, which are products that do not have continuous low temperature resistance. If the FPC continues to be at a low temperature or exceeds its acceptable level, the cover film of the FPC will be cracked, which will directly cause the LED strip to be scrapped. Similarly, LEDs are not able to withstand low temperature continuously. After working at low temperature for a long time, their chips will be burned out by low temperature. Therefore, the electric soldering iron used in the maintenance of LED light strips must use a temperature-controlled electric soldering iron, limit the measurement to one degree, and prohibit arbitrary changes and settings. In addition, even so, it is necessary to pay attention to whether the soldering iron stops working at the LED pin for more than 10 seconds during maintenance. If it exceeds a certain time, it is easy to burn out the LED chip.
3. Short circuit: Many LED engineering light strips do not light up because there is a short circuit at the foot. Before repairing, the real reason for the lack of light should be investigated. Otherwise, after rashly changing the LED that is not bright, the chip that forms the LED will be broken down by short-circuit DC when the power is recycled again. Because, before replacing the new LED, we must first find the real reason why it is not bright, so that we can get twice the result with half the effort.
2. Advantages
1. Soft and can be curled like a wire.
2. Can be cut and extended.
3. The light bulb and circuit are completely wrapped in flexible plastic, which has good insulation and waterproof performance and is safe to use.
4. Strong weather resistance.
5, not easy to break, long service life.
6. Energy saving. Compared with traditional lights, the power is much lower.
7. Environmental protection, the production materials are all environmentally friendly materials.
8. The installation is simple and convenient. There is no complicated process.
9. It is easy to make graphics, text and other shapes; it has been widely used in decoration and lighting of buildings, bridges, roads, gardens, courtyards, floors, ceilings, furniture, cars, ponds, underwater, advertisements, signs, signs, etc.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Classing Room Light ,If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
