Fin-type radiator industrial and mining lamps greatly reduce the weight of industrial and mining lamps
Its function can be to strengthen and supplement the lighting on the basis of general lighting, or it can be used as temporary lighting in some places that do not need lighting at ordinary times (such as equipment maintenance and maintenance places). Most of their light distribution is not strictly regulated. Local lighting is usually installed near the work area, using incandescent lamps and tungsten halogen lamps with safety extra-low voltage (≤50V, AC effective value) as the light source. There are (hand-held) running lights, hanging lights, work desk lights, machine tool work lights, etc. In some tall factories, spotlights are sometimes used for local lighting.
Industrial and mining lamps LED industrial and mining lights are more efficient and more energy-saving. The 100W LED industrial and mining lamps can replace the traditional 250W traditional industrial and mining lamps. Traditional light sources all have the disadvantage of high lamp temperature, which can reach 200-300 degrees. The LED itself is a cold light source, the temperature of the lamp is low, and it is safer, and it is a cold drive.
In the continuous innovation of LED high bay lights, the new fin-type radiator high bay lights have a more reasonable radiator design, which greatly reduces the weight of industrial and mining lamps, and reduces the overall weight of 80WLED high bay lights to below 4KG, and can solve 80- The heat dissipation problem of 300W LED high bay light.
In order to meet the visual needs of different production operations and the needs of lighting installation conditions, the reflector of the industrial and mining lamp should be able to produce various wide and narrow light distributions. The surface is painted and glazed to make it appear white, and reflectors made of aluminum, glass mirrors, prism glass and other materials can obtain a wide light distribution, which is suitable for large-area, vertical or nearly vertical workplaces . For tall workshops and places with tall machine tools that require separate lighting, reflectors made of materials with strong light control properties such as prism glass, mirror glass, and polished aluminum can be used to obtain a narrow beam distribution.
Project-light lamp manufacturers have long-term and reliable work in dusty, humid and other places with poor environmental conditions. Industrial and mining lamps have special requirements in terms of structural design, housing and reflectors. Closed lamps or convection lamps with upward luminous flux should be used in dusty environments (see figure); in humid environments, attention should be paid to the airtightness of the enclosure and the surface treatment of the reflector; generally open lamps are commonly used indoors, using enamel surface reflection Reflectors, aluminum reflectors with thick aluminum oxide film on the surface or with silicon dioxide protective film.
