How is the desk lamp assembled? Table lamp installation method skills
Table lamps are a kind of lamps that everyone is familiar with. This kind of lamps is not very bright, has a relatively small range, and is a kind of low light. Generally, there are more desks or bedsides. So how is the table lamp assembled? What are the tips for installing table lamps? Don't worry, BENWEI LIGHTING is here to explain it to everyone, let's take a look.
desk lamp
How is the desk lamp assembled?
1. The function of the mechanical part is to satisfy the support for lighting bulbs and circuits, and to achieve a certain range of angles of flexion and extension and rotation. It is mainly composed of the following parts: Base: It is a small square wooden board of moderate size (the size is determined according to personal preference, and the style can also be made into various other shapes).
2. Light stand: It is composed of two wooden hangers, an iron rotating joint, two iron angle connectors (using two hinges), three sets of screws, and six self-tapping screws.
3. The electrical part is the core part of the desk lamp, and is the part that realizes the lighting of the desk lamp. The main components are: a power cord with a plug, an incandescent lamp holder, an energy-saving lamp and a lampshade.
desk lamp
Table lamp installation method skills:
1. The basic requirement for the installation of lamps and lanterns is that they must be firm. When installing wall lamps, bedside lamps, desk lamps, floor lamps, mirror lamps and other lamps indoors, if the height is less than 24m and below, the metal shell of the lamps should be grounded to ensure safe use.
2. When installing low-foot lamp holders in bathrooms and kitchens, it is advisable to use porcelain screw-mouth low-foot lamp holders. The wiring and phase wire (switch wire) of the screw lamp holder should be connected to the contact terminal, and the neutral wire should be connected to the screw terminal. For the safety of lamp holders with switches, such as desk lamps, the handles should not have exposed metal parts.
3. When installing various lamps on the decorative ceiling, they should be installed in accordance with the requirements of the lamp installation instructions. When the weight of the luminaire is greater than 3kg, it should be installed with a pre-embedded hook or a support and hanger directly fixed with an expansion bolt from the roof (the luminaire can not be installed with a flat-top keel bracket). The wire from the lamp holder box should be protected to the lamp position with a hose to prevent the wire from being exposed in the flat roof.
4. The dark wires in the suspended ceiling or wall panels must be protected by flame-retardant casings. The installation of special lamps and lanterns The special installation places of household lamps are mainly the part of the ceiling. Many people like to install the diffuser lights in the dark, but not everyone can install them.
desk lamp
The above is an explanation of the knowledge of how the table lamp is assembled and the installation method and technique of the table lamp. The content is for your reference only, and I hope it can be helpful to you.
