Right beam angle
Light beam angle suggests exactly how spread the light would be. For the high mast or high bay application, if the light beam angle is wide, although the uniformity is really high, the ground illumination is extremely low.
On the contrary, too narrow beam of light angle makes the lighting harmony extremely reduced because it produces several “spots” despite of its high illumination. And thus, there is a best balance in between harmony and brightness. Our designers are proficient in doing the photometric evaluation and also therefore assure far better lighting result for any kind of kinds of jobs.
Good heat dissipation
It stays clear of the LED flood light being damaged as a result of overheating. A good heat sink must be made from pure aluminum which has high heat performing rate of 238 W/mk– higher the value, higher the conductivity rate. The heat conducting price of die cast iron is only 54.4 W/mk.
When it concerns the architectural layout, an excellent heat dissipation system ought to be consisted of enough air ventilation flow inside the lamp. As you can see from the above photo, there are hollow framework and also room between each row of LED chips to assist heat transfer from the light body to the surrounding.
After that, the heat dissipation location ought to be large. The heat dissipation system has thick light weight aluminum fins range to speed up the air conditioning process, and also thus secure the flood lamps.
Waterproof of outdoor flood lights
IP65 is a must. For some environments, IP67 or IP68 is called for such as underwater fountain lights or fishing lights.
Apart from straight water immersion when using the lights, the IP65 rated flooding lights can function under the inclement weather, which is crucial in outdoor sports area, flight terminal, road light and also even more.
Extra tips on sports flood lighting
There are 3 extra tips for you regarding to sports field lamps.
Color rendering index (CRI)
This is an index showing you how well the color will be revealed under a certain illumination. In sports lighting, CRI 70 or 80 is acceptable. But sometimes we will need extra high CRI of 90 to 95 for art gallery, museum or broadcasting.
Glare rate (light leakage)
Which is rarely mentioned yet it is also vital for sporting activities lights– too much leakage will irritate the target markets as well as gamers, it also decrease the brightness on the targeted areas.
Our flood lights adopt the advanced lens that concentrated the beam to the area we desire as well as minimize the light leakage by 50%.
Flickering issue
Although flickering might not be observable by naked eyes, it can be considerable under cams, especially slow motion.
Our flickering rate (lumen fluctuation amplitude) is much less than 0.3% of the overall lumen, and for this reason also the 4K TV broadcasting electronic camera will not have recognizable flickering if the sporting activities field utilize our LED flooding lights.
