1. Pursue quality:
We choose the best LED stadium lights, we must choose the excellent quality lights, such as good heat dissipation structure, convenient heat dissipation, independent power control system and embedded button control box, easy to repair and replace, lens angle selection Many, long shelf life, high typhoon resistance, high IP index. As we all know, the high-power sports light chip generates more heat. Therefore, a good heat dissipation structure is extremely important for sports lights. It can not only greatly increase the service life of lamps and reduce light decay, but also ensure the safe use of lamps. Hishine conducted repeated experiments on sports lights for 10 years, and finally used a unique hexagonal heat dissipation structure, which can quickly dissipate heat. Hishine can ensure the same luminous efficiency within 7 years, and the life span exceeds 50,000 hours.
2. High Lumen:
Lumen, a unit of luminous flux. A point light source with a luminous intensity of 1 candela (cd) has a luminous flux per unit solid angle (1 steradian) of "1 lumen", the English abbreviation (lm). The so-called lumen simply refers to the brightness of a candle light one meter away (1 meter = 1 meter). Lumen is a unit of luminous flux. In principle, the greater the luminous flux, the better, but the increase in luminous flux is achieved by increasing the current. This may bring about two negative effects: a. High current can easily cause light decay. b. When the luminous flux is high, the color rendering will decrease. Hishine uses high-quality Lumileds lamp beads, which reduces these two negative effects to zero.
3. Ensure that the stadium lights are waterproof and wind resistant:
Because the stadium area is large and usually open in the open, it is inevitable that there will be typhoons and heavy rains, so the sports lights need a wind resistance level of 10 or more. High-pressure jet water has no effect and completely prevents dust from entering. Therefore, the IP index cannot be less than IP65.
4. Easy to install:
For the installation of sports lights, the simpler the more convenient. The simpler the lamp technology, the more mature. And the guide has a variety of installation methods, so as to be suitable for various occasions. The usual installation methods include 360° rotating bracket, round rod bracket, U-shaped bracket and other installation methods.
5. Looking for a higher color rendering index:
The color rendering index (CRI) refers to the ability of the light source to restore the visual perception of the object under the sun. The higher the color rendering, the closer the color rendering index value is to 100, the stronger the ability to restore the color of the object, and the easier it is for the human eye to distinguish the color of the object.
6. Color temperature:
sports lighting needs natural white lighting, the color temperature is about 4000K, and the color temperature of football and basketball courts is between 5000K and 5700K.
