How to install led rail spotlights
1. Turn off the main power supply, make sure that the power supply is turned off, and operate safely. Open the track package and remove the wiring cover. In order to facilitate installation, connect a section of power cord at the wiring place, the longer the better.
2. Install the slideway (track). If the roof has iron keel or directly nails and drills the wood board, you can directly install the slideway. For the sake of beauty, first make a small hole in the junction box to make Lead the power cord into the roof.
3. There is another problem. Most of the ceilings in shopping malls are made of gypsum board, which cannot be firmly fixed. Aircraft expansion plugs can be used, and some require perforated lower hanging ribs (harness wires).
4. After fixing the chute, take the chute light and screw the clamp of the base of the chute light.
5. Align the groove of the slideway and insert the base of the slideway light into the slideway.
6. After applying a little force, unscrew the rotating handle of the chuck and adjust it from left to right. Note that it must be screwed in place and fixed.
