How to make good use of LED surface mounted downlights for airport lighting is also an art
The waiting room is one of the important areas in the airport terminal. It has special functions, including specific lighting rules. Here to understand the "essentials" of the lighting methods in the waiting room, and through a number of domestic airport waiting room cases, to more intuitively demonstrate the art of using LED downlights and other lamps in this area.
Lighting "essentials" in the waiting room
The waiting area of the airport terminal is located at the boarding gate, so it is also called the "boarding gate rest and waiting area". As the name suggests, it is an area where passengers stay at the airport before boarding. Coming to this area means that all formalities have been completed and you can relax and move freely.
In this area where the rhythm is obviously slowing down, the lighting requirements are no longer the same as those in other areas of the airport, which require a deep sense of entry and exit and orientation, and more need a mild and comfortable light environment. Because passengers may have to wait for a long time, the lighting settings and color temperature arrangements need to be adjusted appropriately, and the lighting levels should be richer and more delicate.
In the use and selection of lamps, it is necessary to set the power and beam angle of the LED downlight to ensure sufficient illumination (up to the national standard of about 300Lx), but there must be no glare (directly affects the experience) . For the waiting area with higher floor height (H≥7m), high-power surface mounted LED downlights should be used; and for areas with low floor height (H≤7m), high-power surface mounted LED downlights should be used.
The advantages of LED surface mounted downlights produced by Benwei Lighting:
(1) Led surface mounted downlights have good starting performance, fast and reliable, only millisecond response time, and can achieve full luminous output.
(2) Led surface mounted downlights are resistant to vibration, weather resistance and long life.
(3) The LED downlight is highly adaptable. LED downlight has no start-up time problem, and it can work normally immediately after power-on, without long waiting. The light source has good color rendering, close to natural light, quick and flexible installation, adjustable at any angle, strong versatility, and a wide range of applications.
(4) The color rendering index of LED downlight is higher. The color rendering index requirement of the national standard for this interval is Ra=80, and the color rendering index of LED light sources is generally higher than that of traditional light sources. At the current level, the color rendering index of LED downlights can reach 70 to 85.
(5) Led surface mounted downlights have obvious advantages and are more favored by consumers. At present, they are mainly used in airports, high-speed railway stations, high bays, large shopping malls, supermarket lighting and factory lighting, etc., with a broad development space.
Led surface mounted downlight is a product of the combination of led lights and downlights. It completely inherits the advantages of led lights and downlights. The products under the strong cooperation are energy-saving and decorative. High-power LED surface mounted downlights are used in railway stations, high-speed rail canopies, stations, subway stations, airport terminals, office building lobbies, and corridors.
