How to use and maintain electric vehicle batteries correctly
Electric vehicles are basically available in every household, but many people do not know how to properly use and maintain electric vehicle batteries, which seriously affects the service life of electric vehicles and even causes serious safety accidents. Common problems and precautions:
1. Mixed charger
Due to the popularity of electric vehicles, many users have more than two electric vehicles in their homes, and some users often mix chargers for convenience. If the battery is 48V, but a 60V charger is used, because the voltage does not match, the battery pressure will be too high, the internal temperature will rise, and the battery will deform in a short time. In addition, the practice of mixing chargers is very dangerous, and it may even directly damage electric vehicles. Therefore, it is recommended that the charger is dedicated to the car.
2. The battery is aging and damaged
Normal trams are equipped with batteries after they leave the factory. However, as time goes by, the batteries will age or be damaged due to various reasons after they have been used for a long time. The battery cannot be saved, and the battery may become too hot or even hot. At this time, it is recommended to replace the battery to avoid dangerous situations.
3. A single battery is short-circuited
If a single battery is short-circuited, it will also cause the battery's temperature to become too high during charging. In this regard, the correct way is to use a multimeter to detect the problem battery. You can select batteries with the same specifications and performance for replacement. If the results are not good after replacement, you need to replace the entire set of batteries.
4. The environment does not meet the requirements
Electric vehicle charging has relatively high environmental requirements, and it is necessary to choose a well-ventilated area that is not directly exposed to the sun. Daily consumers often charge electric vehicles in a high-temperature environment, directly exposed to the sun, or charge in a sweltering closed environment. This will easily cause the battery to run out of thermal control, causing the charging to not turn on the lights or deform; therefore, it is recommended to use the daily process. In, strictly follow the requirements of the instructions to operate.
5. Irregular charging habits
For some consumers, charging is more casual, such as: charging immediately after riding, charging in high temperature environments, frequent charging times, overcharging, etc. The result of this is that the battery is extremely prone to lack of liquid, which causes the battery to deform. Therefore, try to stop charging as soon as possible after the charging turns to the green light. Pay attention to choosing a ventilated and cool environment for charging, and strictly control the charging time according to the required mileage every day.
6. Use poor quality batteries
Normal maintenance is very important, of course, choosing a pool is even more important! Inferior battery life is short, there is no guarantee after sales, and it is prone to safety hazards, so choose high-quality electric vehicle batteries!
