Install street lights in industrial parks
High bay lights are generally installed in dusty, humid and other places with poor environmental conditions. In order to work reliably for a long time in these places with poor environmental conditions, high bay lights have special requirements in terms of structural design, shell and reflector.
In dusty environments, closed lamps or convection lamps with upward luminous flux should be used; in humid environments, attention should be paid to the airtightness of the casing and the surface treatment of the reflectors; generally, open lamps are commonly used in indoor floodlights, and enamel surface reflectors are used. , aluminum reflector with thick aluminum oxide film layer on the surface or coated with silicon dioxide protective film; considering the inevitable vibration in the production site, the fixed light source should use anti-loosening lamp holder, and so on.
In order to meet the visual needs of different production operations and the needs of lighting installation conditions, the reflector of the high bay light should be able to produce light distributions of various widths and degrees.
Before installing the high bay light, the corresponding inspection work must be carried out. Below, Fuqilai Lighting summarizes the specific work to be done when installing the high bay light.
1. Installation process of high bay light: check the lamps - assemble the lamps - install the lamps - power on and test run.
2. Factory lamps: lamps and accessories are complete, without mechanical damage, deformation, coating peeling and lampshade cracking and other defects.
3. Workshop lights: The lamps are installed on the I-beam purlins of the roof truss. First check and determine the installation location and fixing method.
4. Before installation, it is necessary to check whether the existing line meets the lighting load, whether the line meets the conditions of use, and whether it is aging. If there is an aging line, replace it first.
LED high bay lights are widely used in factories and mines. It is necessary to pay attention to a few points when producing them:
The LED high bay light is painted and glazed to make it appear white, and the reflector made of aluminum, glass mirror, prism glass and other materials can obtain a wide light distribution, which is suitable for large areas, vertical or nearly vertical working surfaces. workplace.
For tall workshops and places with tall machine tools that require separate lighting, reflectors made of materials with strong light control properties such as prism glass, mirror glass and polished aluminum can be used to obtain narrow beam distribution.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Classing Room Light ,If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
