Installation and use method of led project light strip
With the development of the times, people's activity space in the indoor environment has increased, and the influence of LED light strips and other lighting on people, the city, and nature is gradually increasing, and the light strips have become more and more prominent than the previous lighting. It is more in line with the new requirements of sustainable development.
One of the precautions for the installation of led engineering light strips: the wiring method of LED light strips The general voltage of LED light strips is DC 12V, so it is necessary to use a switching power supply to supply power. The size of the power supply is determined according to the power and connection length of the LED light strip. The wiring of the single-color 5050 SMD LED light strip is to distinguish the positive and negative poles. Generally, we provide the welded power plug, just plug it directly into the light strip power supply we provide, and then input all the LED light strips into the power supply. Connected in parallel, unified by the main switching power supply. LED light strip installation precautions: The controller connection method LED marquee light strip and RGB magic light strip need to use the controller to achieve the changing effect, when wiring.
1. The power supply voltage should be the same as that marked on the LED flexible light strip, and appropriate safety devices should be installed.
2. When the light body is damaged, please cut off this part immediately, and do not continue to use it to avoid danger.
3. During use, please do not wrap it with any object to cover the LED soft light strip.
Fourth, the need for flashing, gradient and other effects, you can use the LED controller.
Fifth, the installation is fixed. Do not use iron wire and other metal materials to tie the light tube tightly to prevent the iron wire from falling into the LED soft light strip, causing short circuit or burning.
6. The interface needs to be firm and there is no hidden danger of short circuit. When installing outdoors, each interface needs to be sealed with glass glue to ensure that water does not enter the interface.
7. Only two LED strips with the same specifications and voltages can be connected in series, and the total length cannot exceed the maximum operating length.
8. Do not turn on the power supply during the installation or assembly of the light strip. The power supply can only be turned on when it is connected, installed and correct.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Classing Room Light ,If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
