Installation method of recessed downlight lamps, downlight installation precautions
Downlights are generally used as auxiliary lights in home lighting, and are usually found in living rooms, bedrooms, corridors, porches, etc. The downlights are small in size and can be directly embedded on the ceiling. will take up too much space.
The installation method of embedded downlight can be divided into the following steps:
1. According to the size and installation position of the downlight, scribe and drill holes on the ceiling;
2. Connect the reserved power cord in the ceiling to the downlight;
3. Adjust the wing nut of the fixed reed of the downlight so that the height of the reed is the same as the thickness of the ceiling;
4. Push the downlight into the ceiling opening.
Downlight installation precautions:
1. Pay attention to checking the product. Before installing the downlight, be sure to conduct a comprehensive inspection of the product so as not to affect the use. Under normal circumstances, the product can be returned and exchanged if there is a quality problem that is not damaged by human factors.
2. Pay attention to cut off the power supply. In order to avoid electric shock problems during installation, be sure to disconnect the power supply before installing the downlight. When the wiring is complete, you can turn on the power and check to ensure that the wiring is intact.
3. Pay attention to the installation location. During the lighting process of the downlight, the surface of the lamp will generate a certain amount of heat, so when determining the installation position, keep a certain distance from the wall, so as not to be too close to the wall, the heat emitted will make the wall yellow and reduce the indoor air Aesthetics. In addition, the installation location should avoid the heat source in the home or the place where hot steam is generated, so as to prevent the hot air from causing damage to the lamps and shortening the service life.
4. Confirm the number of installations. Before opening the installation, it is necessary to confirm the required number of downlights in advance to avoid defects during the installation process. In addition, confirming the quantity also means determining the applicable power supply. If a high-voltage power supply is used, it must be ensured that the power on and off cannot be too frequent.
5, pay attention to the use of space. Downlights are indoor lights and generally cannot be used outdoors. If they need to be used outdoors due to special circumstances, waterproofing must be done during installation. In addition, for the space where the ceiling is made, it is best to confirm the load-bearing capacity of the ceiling before installation. In order to ensure safety, the load-bearing capacity of the ceiling for installing the downlight must be about 10 times greater than the weight of the product itself.
6. Pay attention to smoothness. Since most of the downlights adopt the embedded installation method, there are certain requirements for the flatness of the installation position, which must be flat and free of fire hazards and vibrations. During installation and use, avoid collision or knocking with hard objects to avoid damage.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Classing Room Light ,If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
