Installation steps of LED projection lamp
With the continuous development of Le high-power floodlights, the market has become larger and larger. In many places, we may face a problem that we won't install them. Here's how to install led high-power floodlights
The installation of LED high-power floodlights for lighting engineering lamps is very simple, but it takes a lot of trouble to install them properly. I have seen in many places that the installation of LED floodlights is directly to install and fix the floodlights, and then connect the power lines (color signal lines). In fact, this method is correct, but because the quality of products produced by different manufacturers is different, many of them are of poor quality or have problems, This installation has been repeated several times. Since I am not a technician, I do not know how to install the LED
Why is the floodlight not normally on (especially when the color needs to be connected to the controller).
First, ensure that the LED projection lamp is good when receiving the goods. When receiving the LED projection lamp, try to check the appearance of the LED projection lamp to see if it is damaged.
Second, when the floodlights are ready to be installed on the construction site, they should first organize the installation personnel according to the installation drawings attached by the factory. First, they should connect several floodlights to try whether the installation drawings are correct. If conditions permit, they can be arranged to light up one by one, so as to avoid taking them to the building. After they are installed, they should be dismantled.
The third is to remind the installation workers of the importance of fixing and wiring, especially the waterproof of outdoor wiring is very important. When fixing and wiring, it is better to recheck,
Fourth, after the LED projection lamp is fixed and connected, when it is ready for trial lighting, Z should use a universal meter to type on the main power supply to check whether there is wrong connection or short circuit,
Fifth, after all the trial lighting is done, try to light as much as possible -- for a period of time, and then recheck the next day and the third day. After this, everything is good, and there will be no problems later.
matters needing attention:
When installing led high-power floodlights, the installation workers must know the importance of fixing, wiring, and thread waterproof.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: https://www.benweilight.com/.
