Integrated T5 LED tube specifications
That is, the T5 LED tube and the T5 bracket are combined into one. Wiring sockets are provided at both ends. Equipped with a three-core plug, 2 metal buckles, and an adapter. The advantage of the integrated lamp is that there is no need to buy a bracket, after all, it will increase the cost. The installation method is also easy. Fix the buckle, and the lamp tube is installed.
It should be noted that there are two types of integrated T5 LED tube specifications
One is the relatively large shadowless T5 LED tube, that is, when it emits light, the appearance of the light spot produced by the lamp bead is not visible. The main reason is that the PC lampshade is far away from the LED lamp board. Plug size, width*height=23*34
One is the relatively small and low-profile T5led tube, which mainly considers the installation position. In the case of relatively small space, this can be considered. Plug size, width*height=21*27
Since the space of the integrated T5led tube is larger than that of the split T5led tube, the power supply can be replaced with multiple types. In this way, it can derive many new products.
For example, integrated T5 LED tube waterproof type, integrated T5 LED tube dimming type, integrated T5 LED tube radar sensor type
It is more flexible in practice. The length can even be the same as the integrated T8 LED tube.
Due to the bracket and good heat dissipation, the power wattage of the integrated T5 LED tube can be larger, and the light efficiency can be higher.
Another advantage is that the LED light board can be used with T8 LED tubes, which is a great advantage for production preparation.
