LED high pole light use and daily maintenance precautions
LED high pole light application:
High pole lights are suitable for outdoor lighting projects such as municipal engineering, highways, overpasses, parking lots, stadiums, freight yards, ports, airports and citizen leisure squares.
LED high pole light is a kind of lighting used in highways, roads and other places. Beautiful shape and strong decorative effect. The lighting area is large, the lighting effect is good, the light source is concentrated, the illumination is uniform, the glare is small, and it is easy to control and maintain.
What matters should be paid attention to in the maintenance of high pole lights?
1. Ensure that the safe power supply of the surrounding environment is cut off.
2. Keep away from the light board and avoid the above things during high maintenance.
3. Check the ropes and facilities for later failures.
4. Ensure the safety of maintenance personnel.
When installing it, try to avoid the occupant's window being too close to the high-pole light, and also consider factors such as environmental protection.
The lifting and lowering of the lamp panel of the high pole lamp is realized by changing the rotation direction of the motor. The lifting system of the elevating high-pole light is driven by the motor, worm gear reducer, safety coupling, main wire rope, auxiliary wire rope, rope divider and movable pulley block to drive the up and down of the lamp panel.
The worm gear reducer has strong self-locking ability. In order to reduce the gear ratio of the worm gear and the worm, and reduce the rising torque, a set of movable pulleys are specially added, so that the lifting speed of the lamp panel is less than 0.2 m/s.
The main and auxiliary steel wire ropes are made of high-strength corrosion-resistant 6*19 type non-rotating galvanized steel wire ropes.
Lifting pulleys are made of A3 steel brackets, stainless steel shafts, and copper pulleys that have been hot-dip galvanized to ensure that they operate flexibly without rusting under normal atmospheric conditions. Various fastener washers, collars and other parts are also made of hot-dip galvanized parts or stainless steel.
There are 6 sets of guide pulley sets and more than three sets of braking devices on the lamp panel. During the lifting or lowering of the lamp panel, the guide wheels distributed at 120 degrees roll along the surface of the lamp pole to ensure that the lamp panel does not swing.
The lifting pole light has two lifting control modes, manual and electric, so that the light panel can be safely and reliably lowered to 2.5 meters above the ground, which is convenient for maintenance work. The length of the lead wire of the manual remote control device is 10 meters, and the operator can remotely control the lifting and lowering of the light panel at 5 meters, which can ensure the personal safety of the operator.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Classing Room Light ,If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
