LED is a very reasonable light source
Explosion-proof led lamp manufacturer vertical boom type equipment: first pass the connector through the cable, screw in the steel pipe, tighten the set screw, and then pass the cable through the gasket, the sealing ring until the junction box in turn (reserve a certain length of cable (convenient wiring), then tighten the lamp body and the connector, and tighten the set screw;
Ceiling-mounted equipment: screw the 3/4-inch adapter into the ceiling-mounted adapter, screw the connector into the 3/4-inch adapter, tighten the set screws separately, and then pass through the cables, the equipment is on the roof, and the cables are passed through in turn Gasket and sealing ring to the junction box (reserve a certain length of cable for easy wiring), then tighten the lamp body and the connector, and tighten the set screw.
LED is a solid-state semiconductor device that can convert electrical energy into visible light, which can directly convert electricity into light. The heart of an LED is a semiconductor wafer. The semiconductor wafer consists of two parts, one part is a P-type semiconductor, the other end is an N-type semiconductor, and here is mainly electrons. But when the two semiconductors are connected, a P-N junction is formed between them. When the current acts on the chip through the wire, the electrons will be pushed to the P area, which is the principle of LED light. The wavelength of light is also the color of light, which is determined by the material that forms the P-N junction.
LEDs can directly emit red, yellow, blue, green, cyan, orange, purple, and white light. LEDs are used as indicating light sources for instruments and meters. Later, LEDs of various light colors have been widely used in traffic lights and large-area display screens, resulting in good economic and social benefits. Take a 12-inch red traffic light as an example. In the United States, a long-life, low-efficiency 140-watt incandescent lamp is used as the light source, which produces 2,000 lumens of white light. After the red filter, only 200 lumens of red light remains. In the newly designed lamp, Lumileds uses 18 red LED light sources, including the loss of the circuit, which consumes a total of 14 watts of power to produce the same light effect. Car signal lights are also an important area for the use of LED light sources.
Because LED is a solid-state cold light source, it has the advantages of high electro-optical conversion efficiency, low calorific value, low power consumption, low power consumption, and low energy consumption, so high-power white light LED is a very reasonable light source. In explosion-proof lamps, especially portable objects, the requirements are more severe. LED explosion-proof lights are all qualified after repeated practice, and all have passed national technical standards. The electrical equipment used in the special work mainly deals with lighting problems, including the lamp housing, the lamp housing arranged at the front end of the lamp housing, the illuminant arranged in the lamp housing and the switch on the outer surface of the lamp housing.
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry， our web: 
https://www.benweilight.com/.
