Knowledge

Home/Knowledge/Details

Lighting requirements for hotel lobby and guest rooms

Lighting requirements for hotel lobby and guest rooms


Lighting plays a vital role in hotel lighting design. It can highlight the design theme and texture of the hotel, and also enable customers to immerse and fly in the ocean of light, and feel romantic in luxury. If the hotel does not have the decoration of lamps and lanterns, it is not only a simple loss of a decoration, but also a lack of necessities to highlight the texture of the hotel. Any type of hotel must create a cordial, warm and friendly atmosphere, which is the common appeal of the hotel. In this issue, I will introduce to you the lighting requirements of hotel lobby and guest rooms.

lobby


No.1 Lobby


There are three main lighting areas in the lobby space, they are the lighting of the entrance and the front hall area, the lighting of the service desk and the lighting of the guest rest area. From the perspective of the lobby as a continuous space, and from the perspective of lighting methods, in fact, the entrance and front hall should be general lighting or global lighting in the lobby, and the service desk lighting and guest rest area lighting should be local lighting.


These lighting should maintain the consistency of color temperature. The lighting in the three areas can be contrasted in brightness, so that the non-intimate scale space of the hotel lobby forms an interesting, continuous and undulating transition of light and shade, creating a friendly atmosphere as a whole.


Entrance and foyer


Illumination requirements: On a horizontal plane 1m above the ground, the designed illumination should reach 500Lux.


Color temperature requirements: about 3000K. If the color temperature is too low, the sense of space is narrow, and if the color temperature is too high, the space lacks intimacy and is noisy, which directly reduces the comfort of the guests.


Color rendering requirements: Ra>85. The high color rendering can clearly show the skin color and various expressions of the receptionist and the guests, leaving a deep and satisfactory impression on the guests.


service desk


Illumination requirements: generally take 750-1000Lux. The higher brightness highlights the importance of the main service desk, and quickly leads the guests' attention to this place. In addition, it also facilitates the quick processing of the receptionist's registration and settlement work.


Color temperature requirements: about 3000K, consistent with the entrance hall, to further strengthen the cordial atmosphere.


Color rendering requirements: Ra>85. On the one hand, it is because of the close contact between the guest and the receptionist at the service desk, which requires a healthy complexion; on the other hand, it is necessary to clearly identify the various documents required.


Guest lounge area


Illumination requirements: generally take 300-500Lux. If the illuminance is too high, people's behavior will be unstable; if the illuminance is too low, people's behavior will be too lazy.


Color temperature requirements: about 3000K.


Color rendering requirements: Ra>85.

hotel room2


No.2 Room


A hotel room should feel like home, where tranquility, comfort and intimacy are typical keynotes.


Illumination requirements: The general room lighting is 50-100Lux, and the room illumination is lower to reflect the characteristics of quietness, rest and even laziness; but the local lighting in the room, such as the lighting in front of the vanity mirror, the bedside reading lighting, etc., should provide sufficient illumination, these The illumination value of the area can be 300Lux; the most neglected is the writing lighting of the desk. At present, few hotels provide writing lamps (usually replaced by decorative lamps) to the guests, but this is a very humane room lighting consideration.


Color temperature requirements: about 3000K. Use a light source below 3500K in the bedroom, and use a light source above 3500K in the bathroom. Warm colors are required for lighting in the bedroom, and high color temperature is required in the bathroom to look clean and refreshing.


Color rendering requirements: Ra>90. Better color rendering can make guests feel more confident and comfortable.


Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Classing Room Light ,If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.