Office LED tube lighting program requirements
Office LED tube lighting requirements are relatively high, which is directly related to lighting health. It affects human eyes and is receiving more and more attention. It is not only their outstanding advantages in energy saving and environmental protection, but also a good lighting and visual atmosphere created by them. Langte recommends two office LED tube lighting solutions for you to choose from.
Traditional lighting either uses ordinary fluorescent lights or uses grille lights to supplement light for office lighting. More and more office products are beginning to use the current indoor lighting products, office LED fluorescent lights and LED panel lights are undoubtedly the application Relatively speaking, general lighting products, but as a special kind of office LED fluorescent tube lighting, in addition to using good natural light for lighting, the necessary supplementary light can create a stable, comfortable, reasonable, and healthy environment. It can add some relaxed and lively atmosphere to the depressive office environment that has always been considered. At present, more and more offices are beginning to use LED fluorescent lamps to replace traditional fluorescent lamps to play the role of lighting.
So what are the requirements for office LED tube lighting?
For office LED tube lighting to truly achieve its effects, it generally needs to meet six requirements: 1. Choose a suitable light source color temperature and color rendering index. Generally, choose >4000K color temperature in the office, and choose Ra≥75 for color rendering index. 2. The illuminance requirement of the office place is generally about 500-1000lx. This will meet the comfort. 3. Comfort and glare control: When there is too high brightness or too large brightness ratio in the field of vision, there will be dazzling glare. The measures to prevent glare are mainly to limit the brightness of the light source and arrange the light source reasonably. If the light source is above 45 degrees of the line of sight, form a shading angle or use an opaque material to block the light source. 4. Lighting uniformity: Reasonably arrange the lamps and lanterns so that the difference between the maximum and minimum illuminance and the average illuminance of the office is less than 1/3.5 of the average illuminance. Energy saving and environmental protection: Use high-efficiency light sources, high efficiency and long life. The light distribution generally chooses the batwing light distribution, so that the light intensity can be evenly distributed, the brightness is not easy to be excessive, and the eyes are easy to fatigue. 6. Safety: Consider the safety of the luminaire structure, the safety of electrical appliances, whether the luminaire meets national standards, whether it has passed 3C certification, etc. 7. When replacing, try to make it close to the original office brightness, and the brightness will not be too different after replacement, causing incompatibility.
Langte provides two special LED fluorescent tubes for office,
One is a light-sensing led fluorescent tube, also called a light-controlled led tube, which is completely automatically controlled by the brightness of the ambient light. It can automatically and continuously dimming. When the ambient brightness is low, the light-sensing LED fluorescent lamp will automatically fill the light and the power will increase. On the contrary, if the ambient brightness is too strong, the light-sensing LED fluorescent lamp will automatically weaken the brightness and reduce the power.
The other is a multi-functional led fluorescent lamp, which can realize that the light is on when there are people, and the light is off when there are no people. Function setting, arbitrarily adjustable. It can also automatically realize when to turn on the light automatically and when to turn off the light automatically. Completely intelligent.
