Precautions for installation of LED high bay lights
LED high bay light is a new technology product that requires the installer to be a certified professional electrician. In this way, it is possible to avoid installation errors and damage to the LED high bay light. The following are the installation precautions summarized by Sanhexiang:
1. First of all, check the integrity of the LED high bay light and the completeness of accessories.
2. The wiring on the lamp can be passed through the drill hole and the wiring behind the lamp can be fixed with wire clips, make sure that the fixing is firm.
3. Make sure that the power cord of the luminaire has sufficient length and is not subjected to tension or tangential force. Avoid excessive pulling force when installing the connection of the lamp, and do not make the connection knot. The output connection should be distinguished, and should not be confused with other lamps.
4. The distance between the product and flammable materials should be at least 0.2m, and the zenith to be installed should have a gap of 2 cm high. The lamps should not be installed inside the zenith or beside the wall with heat source. Pay attention to low pressure and high pressure. Piezo wires are routed separately.
