Several installation methods of poultry breeding lights
Chandelier: When the led chandelier is installed on the concrete top surface, it can be fastened with embedded parts, penetrating bolts and expansion bolts. The theme and weight of the lamp can be used to determine the specifications of the expansion bolts during installation, but the minimum is not suitable. Less than M6 (mm), the multi-head chandelier should not be less than M8 (mm), and the number of bolts should be at least 2 less. Light self-tapping expansion tube screws cannot be used.
Ceiling lights: LED ceiling lights have round, square or rectangular bases (chassis), and the bases vary in size. The base of the lamp can be fastened with expansion pipe bolts, or it can be fastened with wood screws on the pre-embedded wooden bricks. If the base of the lamp holder If the diameter exceeds 100 mm, 2 screws must be used. If embedded bolts and penetrating bolts are used for the installation of the lamp base, the diameter of the bolts shall not be less than 6 mm. Wood screws can be used to fix the lamps on the base, and the number of wood screws should not be small. The number of mounting holes given by the luminaire.
Wall lamp: The wall lamp can use the base or no base according to the structure of the base. When using the base, the base should be fixed first, and then the wall lamp should be fixed on the base. The base is generally made of wood, and the thickness of the wood should be greater than 15 mm. The surface is painted with decorative paint. When installing the wall lamp, it can be fixed by screwing the screw into the installation screw hole of the lamp box, or punching holes on the wall, pre-embedding wooden bricks or fixing with plastic expansion screws. The base screws of the wall lamp are generally No less than 2. The installation height of the wall lamp, generally the center of the lamp is 2~2.2 meters away from the ground, and the wall lamp installed at the head of the bed should be 1.2~1.4 meters.
