Solar street light installation steps
Many people don’t know much about the advantages of simple installation of solar street lights. Let’s talk about the installation of ordinary street lights. The installation of ordinary street lights requires laying cables. When laying Dinaran, you need to excavate earth, lay hidden pipes, and thread pipelines. Finally, earthwork is required to be backfilled. These basic projects waste a lot of manpower, material resources and financial resources, and we have to conduct a large number of long-term tests on the city’s circuit lights. Any problem with any line may lead to a large area of rework. The engineering volume is very large, and the overall planning is more complicated;
Then let's take a look at the installation of solar street lights:
1. Observe the geographical situation around the pole: check whether there are any obstacles such as cables, wires, and optical cables that hinder the installation and use of the lamps. At the same time, there is no long-term sun-shading object on the top of the street lamp, otherwise the position should be changed appropriately. Determine the condition of the foundation: the softness of the soil at the survey site, according to the geological situation, determine whether the excavation depth and width of the foundation pit should be increased correspondingly.
2. Installation of the main components of the solar panel: Before installing the solar panel, it is necessary to check whether the function is good. The output positive and negative poles of the solar panel must be taken to avoid short circuits before being connected to the control. The battery assembly must be firmly and reliably connected to the bracket.
3. Lamp installation: The lamp installation line must be connected properly, and the lighting test must be done before installation, and the lamp can be installed on the lamp pole after confirming that there is no problem. The screw of the lamp cap must be fastened during installation;
4. Battery installation: The battery must be well tested before installation. When placing the battery in the control box, handle it gently to prevent damage to the control box; the connection line between the batteries must be bolted to the battery wiring Use copper gaskets on the column to enhance conductivity, and wrap the positive and negative electrodes of the battery with insulating tape; short-circuit the output line after connecting to the battery under any circumstances to avoid damage to the battery;
Benwei always pays attention to product quality and adheres to the tenet of "Quality is the life of the enterprise". At the same time, we always pay attention to the research and development of new products and listen to the opinions of customers with an open mind, which makes us continue to grow and grow in the market competition. "Quality first, reputation first, customer first" is our consistent tenet, "survive by quality, benefit from management" is our corporate creed, and we wholeheartedly provide the best service to new and old customers.
