Talking about what factors need to be considered when choosing rural solar street lamps?
1. The first is the shape and structure of the lamp. The shape of the solar street light cannot be underestimated. In addition to its appearance, it is more important that if the workmanship is not good, it will directly affect the intensity of the solar street light. In addition, the internal structure is also very important. If the structure design is unreasonable, it will affect the heat dissipation of the light source and shorten the service life of the light source. Therefore, we can't just look at the beautiful appearance of the solar street lamp and say that this is a good lamp. The lamp housing currently owned by our company has a hexagonal honeycomb-shaped through-hole structure, which is more conducive to the outward conduction and diffusion of heat from the center of the LED chip, so that the heat dissipation effect of the lamp housing is better. The upper and lower through-hole heat dissipation structure has such a structure. Facilitate the flow of hot and cold air, so that the heat dissipation effect of the lamp is better. A good heat dissipation structure of the housing is more conducive to lowering the temperature of the LED chip, reducing the light decay rate of the LED chip, and prolonging the service life of the LED chip, thereby effectively extending the service life of the street lamp.
2. The weight of the lamp. The weight of the lamp is very important, but the general solar street lamp manufacturers do not have such awareness or have not given much consideration to this aspect. Weight has the most direct impact on the difficulty of installing solar street lights. The lightweight texture makes it easier to move and install, but it also affects the service life of the lights. Excessive weight will have a certain impact on operation and maintenance, so every manufacturer must do a good job of measuring the weight of the product, which can be worked on by its materials.
3. The quality of the solar street light itself. For customers, safe operation is a basic requirement, so manufacturers must regard the reliability of lamps as a prerequisite for improving their products.
