What tools do I need to install lamps? How to install the lamps?
Generally, the installation of lamps and lanterns is done by professional installers, and most of the lamps bought will have installation services, but many people are still curious, what tools are needed to install lamps? How to install the lamps? Don't worry, BENWEI LIGHTING is here to explain it to everyone, let's take a look.
Lamps
What tools do I need to install lamps?
1. What tools are needed to install lamps? The installation of lamps generally requires the use of electric hammer, electric brick, electric iron, saw blade, tape measure, herringbone ladder, digital multimeter and so on. These professional lighting installation tools, with these tools, the lighting can be better completed.
2. Conditions for installing lamps, installation of lamps requires professional related construction drawings and related technical materials. Before installation, you need to determine whether there is water seepage or water leakage on the roof and floor. When the lamp is installed, the lamp installation requires the use of embedded parts and the design requirements of the empty position. If it does not meet the requirements, it needs to be adjusted in time.
3. What tools are needed to install the lamps, the installation process, and before the installation, determine the installation requirements of the lamps in accordance with the installation location of the lamps. Determine whether the lamp installation meets the requirements. When inspecting the lamp, you must understand the relevant documents and related installation techniques of the lamp manufacturer. Check whether the appearance of the lamp is normal and whether there are any problems such as deformation, scratching, corrosion, etc.
4. Lamp installation, in addition to knowing what tools are needed to install the lamp, you also need to understand the lamp cap and the installation steps of the lamp line. Only after understanding these well, we can better install the lamps and lanterns. When the lamp is installed, it will become easier.
Lamps
How to install the lamps?
1. First, prepare the following tools: ladder, screwdriver, pencil, impact drill, diagonal pliers, tape, etc. These tools are all necessary and must be prepared before installing the lamps.
2. After the tools are ready, you can start to install the lamps, but the original lamps need to be removed before installing the lamps, and you must remember to cut off the lighting power in the room before disassembling.
3. After turning off the lighting power supply and removing the previous lamps, take out the new lamps you bought, determine the installation position on the wall, and use the prepared pencil to draw the punching position on the wall. If you follow a square lamp, you must pay attention to the level of the installation of the lamp, otherwise the effect will not be good after the installation is completed.
4. After the punching position is determined, punch a hole on the wall with a percussion drill, and plug the hole into the hole. It should be noted that when drilling with an impact drill, you must not drill too deep, nor should you drill too shallow. It is best if the depth is slightly longer than the riser plug.
5. After the hole is punched, you can first thread the power cord (live wire and neutral wire) on the wall from the inlet hole to the inside of the lamp, and then fix the lamp with the self-tapping thread in the packing box.
6. After the fixture is fixed, use diagonal pliers to strip the wire, then connect the live zero wire on the wall to the live zero wire on the lamp, and wrap it with insulating tape. It should be noted that the alternating current has no positive or negative and can be wired arbitrarily, but be sure not to short-circuit the live wire and the neutral wire.
7. After the wiring is connected, you can turn on the lighting power to see if the light fixtures just installed are glowing normally. As long as there is no problem with the wiring, the lamps can normally emit light under normal circumstances. There is no problem with lighting. Fix the lampshade, and the lamp is completed.
Lamps
The above is the explanation of the knowledge of what tools are needed to install the lamps and how to install the lamps. The content is for your reference only, and I hope it can be helpful to you.
