Knowledge

Home/Knowledge/Details

Circuit analysis of LED explosion-proof lamp

1. Location selection

Electrical lines shall be laid at places with low explosion risk or far away from the release source.

2. Selection of laying method

Electrical lines in explosive hazardous environment mainly include explosion-proof steel pipe wiring and cable wiring.

3. . isolation seal

When the trenches for laying electrical lines and protective pipes, cables or steel pipes pass through the partitions or floors between areas with different explosion hazard environment levels, they shall be tightly blocked with non combustible materials.

4. Conductor material selection

Copper conductor or cable shall be used for power distribution lines within the scope of zone 1 of explosion hazardous environment. Multi strand copper core flexible wire or multi strand copper core cable shall be selected at places with severe vibration. Aluminum core power cables shall not be used underground in coal mines.

Within the scope of zone 2 of explosion hazardous environment, aluminum conductor or cable with sectional area of 4mm2 and above shall be used for power lines, and 2.5 mm2 for lighting lines. And above.

5. Allowable carrying capacity

For the selection of insulated conductor section and cable section in zone 1 and zone 2, the allowable current carrying capacity of conductor shall not be less than 1.25 times of the rated current of fuse melt and the setting current of long delay overcurrent release of circuit breaker. The allowable current carrying capacity of the branch line leading to the low-voltage cage induction motor shall not be less than 1.25 times of the rated current of the motor.

6. Connection of electrical circuit

The intermediate connector of the electrical circuit in zone 1 and zone 2 must be in the interior near the explosion-proof junction box or connector box suitable for the hazardous environment. Flameproof junction box should be used in zone 1, and increased safety junction box can be used in zone 2.

If aluminum core cables or wires are used for the electrical circuits in zone 2, they must be reliable so that users can install and maintain them correctly. v

Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED  manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web: https://www.benweilight.com/.