Compared with T8 LED tube and T5 LED tube, what are the advantages?
T8 LED tube replaces ordinary LED tube, which can save about 60% of electricity. High luminous efficiency and smart led fluorescent lamp energy saving up to 85%
T8 uses built-in power supply, direct replacement, easy installation, in line with people's habits, greatly reducing the trouble of installation, using aluminum-plastic tube, good heat dissipation, can be repaired and used repeatedly, environmentally friendly, and does not damage the environment.
The T5 split tube is thin and does not dissipate heat well. At present, we have launched T5 LED fluorescent lamps with a diameter of 20-22. The power supply can be built-in, and the heat dissipation is greatly improved. The T5 is integrated, and the heat dissipation is good. The installation requires screws.
In addition to the difference in thickness, the length of the integrated T8 and T5 is basically the same, and the installation method is also the same. Because the pipe bracket is integrated, the heat dissipation is very good.
The difference between the two is mainly the diameter, although they are all cylindrical. T8 diameter 26mm T5 diameter 16mm
There is also a difference in length. Generally speaking, the length of the T8 tube is longer than the length of the T5 LED tube. For example, the length is also 1.2 meters. In the case of no pins, the length of T8 1.2 meters is 1198, and the length of T51 .2 meters length is 1149, the difference is still a bit big. It must be noted. Because the mounting bracket is matched with the lamp, they cannot be easily replaced between the two.
The advantage of T8 is that you can make LED tubes with more functions. For example, like radar sensor LED tubes and infrared sensor LED tubes, these two types are generally only available for T8 tubes. T5 tubes are too thin, and the sensor head It can't be installed. However, there is a way to achieve it, and that is to use a T8 to T5 lamp. The purpose is to use a T8 tube, use the length of T5, use T8 for the plug, and use 5mm for the pin. , It is completely achievable. The bracket can also be installed.
The advantage of the T5 LED tube is that it is small, easy to install in a small space, and does not occupy a place. It should be noted that for its good heat dissipation, the power can be made smaller. If high brightness is required, then we recommend high light High-efficiency lamps can meet the requirements. At the same time, the power supply should be placed as far as possible to reduce the interference of heat sources on the lamp. The method of high luminous efficiency is more particular. One is that the brightness of a single LED lamp bead should be high, and the number will increase, and the other is, the lamp The bead voltage should be lower. The third is that the power supply efficiency should be high. The fourth is that the PC cover has better light transmission and many other reasons to meet the requirements of high luminous efficiency. Repeated testing and calculation. Generally professional manufacturers can do it. of.
It is recommended to give priority to the transformation project of replacing LED tubes with T8LED fluorescent tubes, which will have greater energy-saving benefits. At the same time, pay attention to choosing heavier aluminum materials as much as possible when choosing tubes, which will greatly help heat dissipation.
With the development of LED lighting technology in recent years, the underground parking lot energy-saving renovation project uses LED tubes to replace T5/T8 tubes. The optimal solution for energy-saving underground parking lot lighting is through the installation of passive infrared mobile sensors, smart The intelligent LED lamp of the controller realizes the automatic induction of the lamp to turn on, the lights are on when people come, and the lights are turned dark when people go, which is the best solution for energy-saving lighting in underground parking lots. The installation of such products can achieve energy savings of 80% and 90%.
The common benefits of T8/T5 LED lamps are that they are energy-saving, environmentally friendly, and have a long service life. The irradiation area is large, and the power is generally not large, but the use effect is good. Compared with other LED lamps, the advantages are still obvious. Inexpensive, high luminous efficiency .Suitable for large area lighting
