1. Determination of the position of lamps:
The lighting project is mainly to highlight the shape of the bridge deck and beautify the city at night, because the construction of the new lights is carried out after the bridge is completed. The setting of light, lantern spacing and height directly affects the actual effect of the lighting project and the difficulty of maintenance and management.
If the lights on both sides of the bridge are arranged too high, the radiation and reflection effects are not obvious. In addition, if the position of the lighting device is too high, the lamp tube is easily damaged by the outside world, which increases the safety hazard and increases the operation and maintenance cost. The installation position of the lamps is low, the construction operation and maintenance will be more difficult in the future, the bridge will be affected by the light, and the farsightedness effect will be poor.
2. Bridge piping layout:
The installation of bridge supports and pipes requires the installation of lamps. When installing the bridge frame and the conduit support, attention should be paid to the damage and impact of the bridge structure. To this end, during the construction process, the waste holes generated by the installation of the brackets were sealed with epoxy mortar in time to reduce the damage to the structure.
3. Installation of lamps and equipment:
The lighting equipment designed by the lighting engineering on the bridge is different from the usual lighting environment. Most are field work. In the process of bridge deck lighting and equipment installation, it is necessary to comprehensively do a good job of anti-aging and square rain lights for lighting and equipment lines.
4. Anti-theft facilities for lamps and equipment:
The bridge light project is the construction of a new lighting installation project outside the existing structure. The new content is very clear, and the number of some lamps is small, which is inevitably damaged and affected by the outside world. In order to ensure the safe use of lamps and reduce damage, some lamps are equipped with safety shields, and the necessary protection of lamps and pipes is carried out to reduce possible damage.
5. Safety management of bridge lighting engineering construction:
The safety management of urban bridge lightning protection project is a difficult point. First of all, as the main road of the city, the bridge is busy with heavy traffic, and the construction is seriously disturbed by the outside world. On the other hand, the water passes under the bridge, and the lighting of the bridge is on both sides of the bridge. It needs to face the air and work at high altitudes, so it is very dangerous. Lighting construction has greater difficulty and higher safety requirements for safety management.
