General troubleshooting methods for LED lamp beads
Comparison of different connection forms
Different connection forms have their own different characteristics, and the requirements for the driver are also different, especially when a single LED fails, the circuit works, the reliability of the overall lighting, the ability to ensure that the overall LED can continue to work as much as possible, and reduce the overall The failure rate of LED is particularly important.
All in all, the group application of LED is an important way for the practical application of LED. Different LED connection forms are very important for the convenience of a wide range of LEDs and the design requirements of the driving circuit. Therefore, in the combination of the actual circuit, the correct selection of the appropriate LED connection mode is of positive significance for improving the lighting effect, the reliability of the work, the convenience of the driver design and manufacture, and the efficiency of the entire circuit.
LED light-emitting module failure and solution
Phenomenon: All LEDs flicker;
Problem: poor contact;
Solution: Re-fix or plug at the loose place;
Phenomenon: LED dim;
Problems: 1. The polarity of the LED is reversed; 2. The LED is too long; 3. The voltage labels of the switching power supply and the LED are inconsistent;
Solution: 1. Ensure that the positive and negative poles are connected correctly; 2. Reduce the connection of the LED; 3. Ensure that the switching power supply and the LED voltage label are consistent;

Phenomenon: The LED lights of some lines do not light up;
Questions: 1. Is the connection direction correct; 2. Is the power output wiring correct; 3. The power cord is inserted and connected in reverse;
Solution: 1. Remove and re-plug in the correct direction; 2. Make sure that the red wire is connected to the positive pole, and the black wire is connected to the negative pole; 3. Find out some lines that are inserted in the opposite direction; reconnect;
Phenomenon: All LEDs are off;
Questions: 1. The switching power supply has no voltage output; 2. Is the output wiring of the switching power supply correct?
Solution: 1. Test the power connection to the input end of the switching power supply; 2. Whether the positive and negative poles of the power supply are correct;
Benwei Lighting is an LED Tube, LED flood light, LED Panel Light, LED High Bay, LED manufacturer with 12 years of experience. If you want to purchase a high-quality LED flood light or have a more in-depth understanding of the application of LED flood lights, please contact send us inquiry, our web:
https://www.benweilight.com/.




