How to install ceiling lights, detailed installation method of led ceiling lights
After buying the ceiling lamp, you will suddenly remember that you can't install it yourself. It is troublesome to find a master electrician. Then call your husband over. As a man, he still has to handle some miscellaneous repairs at home.
Of course, before installing a ceiling light, you must first know how to install it. Before you start to install it, it is still necessary to know how to install the ceiling lamp you want to install. If you have installed the light, look back at the manual, and find that you have forgotten an important link, it will affect the use of the light more or less.
If you want to know how to install the ceiling lamp, the simplest and most rude way is: read the instructions! Generally, there are installation instructions in the ceiling lamp, and some are written directly on the box. It shouldn't be hard to find if you look closely. Xiaohua recommends that you read the manual, and then install the ceiling light according to the installation method on the manual. why? The reason is very simple, each ceiling lamp will be slightly different, and the corresponding manual is applicable to this lamp. Instructions are often more practical than the installation guides you find online. The manufacturer will also list the installation precautions.
If the ceiling lamp you bought does not have an installation manual, then Xiaohua recommends that you contact the manufacturer, saying that the manufacturer may be exaggerating a bit, and ask the boss who sells the lamp. If you buy it online, ask the customer service and let them give a brief introduction. How to install the lamp and what details should be paid attention to.
Under normal circumstances, the installation steps of ceiling lamps are similar. The following is a brief introduction to the installation methods of LED ceiling lamps:
1. Turn off the power supply switch of the lamp.
This is very important, safety first, turn off the power, you can do whatever you want. If you don't turn off the switch, the wires will have electricity, which is very dangerous, and it will be bad if you get an electric shock.
2. Open the lamp shade and fix the induction lamp to the wall or ceiling with screws and expansion tubes.
Usually, the lampshade of the ceiling lamp is stuck by rotation, pushed in and clamped, or fixed with screws. Pay attention to it and it is not difficult to disassemble. The hole in the ceiling should be marked after the chassis is aligned, and then drilled with an impact drill. The impact drill is very easy to use, and the hole can be drilled by pressing the switch, but it needs to be pushed forward with some force.
For some ceiling lamps, the light source can be removed. If it can be removed, it is best to remove it first. For LED ceiling lights, many light sources are fixed to the chassis, so they cannot be removed. If you can't take it off, be careful not to damage the LED lamp beads when installing the chassis.
3. Connect the power cord and the lamp power cord. First, peel off the 5-7mm length of the power supply cord and the lamp power cord, then twist the exposed metal wires together and wrap them with electrical insulating tape.
Pay attention to keep a certain distance between the two wires. If possible, try not to put the two wires under the same piece of metal to avoid short circuit and danger. If possible, pack a little more electrical insulating tape.
4. Align the lampshade with the lamp and buckle it on the lamp, push it in hard, and fix the lampshade on the lamp.
If the lampshade is screwed, then align the lampshade position and fasten the screws. For the lampshade made of plexiglass or acrylic, these are fragile materials, so be careful when installing, and hold the lampshade firmly.
Although the installation methods of ceiling lamps are similar, Laner still recommends to read the manual. Some LED ceiling lamps have special designs, so you may need to pay attention to some details during the installation process.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Classing Room Light ,If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
