How to maintain track spotlights
1. After you buy the track light, don't worry about installing it, you should carefully check the product manual, and then install it in accordance with the requirements of the manual, so as to avoid trouble after the installation is completed.
2. Do not change the structure of the track light product at will, let alone replace its parts because of your own preferences. After each cleaning and maintenance, you should install the lamp as it is. Don't make mistakes due to omissions, wrong installations and other careless mistakes. The resulting damage to the lamps.
3. Do not switch frequently when the lamp is in use, because when the lamp is frequently started, the current through the filament will be larger than the current during normal operation, which will make the temperature of the filament rise sharply and accelerate the sublimation, which will consume the service life of the filament, so To minimize the switch of lamps and lanterns.
4. All electrical appliances may cause leakage hazard in high humidity places. Lamps and lanterns are prone to problems such as poor insulation and rusty reflectors due to humidity in the air. Lamps and lanterns should be waterproof and moisture-proof to avoid rust damage or leakage short circuits.
5. It is best not to contact too much water to clean the track light. Just wipe with a small amount of water with a dry cloth. If you accidentally touch the water, wipe it dry as soon as possible. Wipe with a wet cloth and remember to disconnect the home power supply to avoid the risk of electric shock. .
