T8 tube with t5 base
What isT8 tube with t5 base? The simple answer is, using T8 tube (diameter 26), making T5 length 1149 and T5 plug, you can replace the original T5 tube. What is the purpose? One is to facilitate heat dissipation, and the other is to facilitate the built-in power supply, which has many benefits. Easy to replace? Just switch off the electric appliance on the basis of the original lamp, remove the lamp tube, and then replace it with a T5 integrated energy-saving lamp. Generally, one can be replaced within 15 seconds. There is no significant replacement cost, and no spare parts are produced. The rectifier of the original inductive rectifier lamp is generally not removed, the purpose is to protect the T5 lamp, step down and stabilize the voltage. The power consumption is only 0.4W, so there is no change. However, please note that if the original lamp uses an electronic rectifier (without a starter), it cannot be replaced directly and needs to be modified, but there is no excessive cost for this, and the time to replace one is about 8-10 minute. That is, the original electronic rectifier is short-circuited and the power cord is directly connected to the two lamp pins.
How to distinguish T8 and T5 fluorescent lamps?
T8 is much thicker than T5
The diameter of T8 is about 3 cm, and the diameter of T5 is about 1.5 cm.
T8 power: 36W (about 120 cm) 30W (about 100 cm) 18W (about 60 cm)
T5 power: 28W (about 110 cm) 21w (about 88 cm) 14W (about 55 cm) 8W (about 30 cm)
The difference between fluorescent lamps T8 and T5, and their respective advantages and disadvantages:
The difference between fluorescent lamps T8 and T5 lies in the thickness of the tube. T8 has a circumference of 8 cm and T5 has a circumference of 5 cm.
T5 (compared to the same type of T5) has lower light attenuation and longer life, but the efficiency of electro-optical (light emitted by consuming 1W of electricity) is low.
T5 (compared to the same type of T8) has greater light attenuation and shorter lifespan, but the electro-optical (light emitted by consuming 1W of electricity) has high efficiency.
T8 to T5 led tube will be better, T8 to T5 tube energy saving, environmental protection, eye protection; no flicker, excellent light performance. Supermarkets use T8 to T5 tubes, which are made by Benwei Company for lighting and energy saving transformation. Langte T8 to T5 led tube saves more than 60% compared with ordinary T5 tube, so it is better to install T8 to T5 tube directly.
Features:
1. The T8led fluorescent tube can be directly installed on the T5 bracket
2 Solve the problem of small light-emitting area of T5 tube
3 Solve the problem of cumbersome installation of the T8 lamp due to the large model
4 can rotate 180 degrees freely
5. The original lamp power supply of T5 is external, and the power supply of this product is built-in, which is convenient
Comparison between LED tube and traditional tube:
1. No ultraviolet rays, can effectively avoid mosquitoes;
2. Does not contain mercury and other hazardous substances (through RoHS certification);
3. No flicker, soft light, protect eyesight;
4. Low heat, low loss, high efficiency and energy saving, more than 80% electricity saving than ordinary energy-saving lamps;
5. Quiet and comfortable, no noise;
6. Long life and ultra-long life, more than 20 times that of ordinary electric light source lamps;
7. Wide color temperature range, pure light, high color rendering index;
8. There is no problem of frequent replacement of lamps, ballasts, and starters.
9. The cost saved in about half a year can be exchanged for cost;
Installation Precautions:
.The installation of the product must be a certified professional electrician.
.The working input voltage of T8 to T5LED tube is 160～240Vac system, please confirm the working voltage of the selected tube before installation.
.When connected to high-voltage alternating current, the LED tube has two ends outgoing, and they are connected to the neutral wire and the live wire respectively.
.Check the integrity of the product when taking it out of the box.
The distance between the product and flammable materials should be at least 0.2m, and the zenith to be installed should have a gap of 2 cm. The lamps cannot be installed inside the zenith or on the wall with a heat source. Pay attention to low pressure and high pressure. The electrical connections are routed separately.
Precautions:
Non-professionals are not allowed to disassemble and repair. Our company has the right to disassemble and repair products without replacement or warranty service.
Langte brand T8 to T5 led tube specifications are: 0.6 meters, the actual length is 549
0.9 meters actual length 849
1.2 meters actual length 1149
1.5 meters actual length 1449
