What is a street light?
Street lights refer to lamps that provide lighting functions for roads, and generally refer to lamps within the scope of road lighting in traffic lighting. It consists of lamps, electrical appliances, light sources, lamp poles, lamp arms, flanges, and basic embedded parts.
Lamp height: The height determines the field of view, so choosing a good height determines the lighting field of view of the street lamp.
1. The installation height of lamps and lanterns, the installation height of the same street lamps must be the same (the height of the light-emitting center to the ground).
2. The special lamp type is installed according to the design requirements, and the height of the lamp is equivalent to the width of the road to be illuminated.
Lamp elevation
1. The elevation angle of the lamp is determined by the street width and the light distribution curve of the lamp, and the elevation angle of each street should be the same.
2. When the lamp head is adjustable, the center line of the light source should fall within the range of L/3-1/2 of the road width.
3. After the lamp body of the long arm lamp (or arm lamp) is installed, the lamp head side should be raised 100mm higher than the pole side.
4. For special lamps, the elevation angle of the lamps should be determined according to the light distribution curve.
Street light fixture part
1. The lamps and lanterns should be firm and correct, and no looseness and skewness are allowed.
2. The lampshade should be intact and not broken.
3. The enamel lamp umbrella is corroded, and the deformed one should be replaced.
4. The reflector surface of the lamp is invalid and should be replaced.
5. The reflector of the lamp should not be damaged or deformed during transportation and installation. The lampshade should be added with rubber ring, and it should be bright after rubbing. When the lamp port is broken and exposed copper, it should be replaced.
6. The lamps and lamp bodies cannot be bent, and the fixing screws of each part need to be tightened with spring eyeliner, and do not loosen.
7. There are cracks in the cast iron lamp holder, the block cannot be used, and the rubber is not qualified.
8. The lamp body hoop should be suitable for the pole, and the installation should not be too long.
Shenzhen Benwei Lighting Technology Co., Ltd is a professional manufacturer in producing LED lighting products, Our main products T8 T5 LED Tube, LED Grow Light,Poultry LED Light,Tri-proof LED Light,LED Flood Light, LED Panel, LED Stadium Light, LED High Bay, LED Classing Room Light ,If you want to purchase a high-quality LED lighting products or have a more in-depth understanding of the application of LED lighting, please contact send us inquiry.
